The One Door Handle Replacement Trick Every Person Should Be Able To

Door Handle Replacement

Door handles seem like a small detail but if you aren't happy with the appearance of the handles or are unable to use them then it's time to replace them. With some patience, you can get an entirely new handle in a short time.

Most modern door handles have cover plates that conceal the screws to create a stylish appearance. If your new handle does not have screws already connected, you'll have to attach them separately.

Remove the old handle

The door handle is not just a decorative feature for your home It's also a safety feature that allows you to lock and unlock your door. As  upvc door handle  passes the door handle could begin to lose its grip or feel loose. It might also begin to look aged and worn. This is a sign that it's time to replace the door handle.

If your door handle is becoming difficult to use, it might be time to replace it. This is a serious problem since you won't be able to lock or unlock the door which could put your family and yourself at risk.

It is also a good idea to replace the handle on your door when it's damaged or broken. A damaged or broken door handle is dangerous, particularly for elderly or children members who may struggle to open it. They could be trapped. It's a good thing that it's simple to fix a damaged door handle by simply replacing the handle that was broken.

Modern door handles are generally standard sizes and should be able to fit any door. If you aren't certain that your new door handle will work, remove the old one and measure the holes in its housing. This will let you purchase the right size door handle.

It is the easiest method to remove the old door handle by removing it from the door. This is typically done with a screw driver. Some door handles have a cover plate which hides the screws that mount them. It is necessary to remove it to get to the screws. Once you've removed your old handle, take note of the way the spindle is connected to ensure you are able to make sure it is aligned when you put in your new one.

You can also remove the door handle by uncrewing it from the latch mechanism. This is usually done with an screwdriver however you'll need to locate the small latch, which should be on the edge of the trim piece. After taking off the latch, remove the handle and the strike plate. Then remove the latch from the edge of the door.

Remove the Strike Plate

When you replace your handle, you'll need to replace the latch plate, which is the hole that the door's latch hooks into when it closes. The new handles will have two latch plates: a rectangular and circular plate (see the above diagram that shows the parts of the door handle). If your current latch plate has rectangular, swap it over to the circular one so that the latch hooks onto the strike plate in a manner that makes the handle more comfortable to use.

The first step is to unhook the screw that is holding the latch plate. The screws are typically tight and require a lot of force to loosen them. If possible, it may be beneficial to have another person assist you with this task.

The latch plate should lift itself out of the door after the screws have been removed. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This can sometimes free up the plate.

Now you can move on to creating the new door strike plate to be installed. Using the wood screws that were included with your new handles, screw the latch plate onto the inside of the doorjamb. Don't over tighten your screws as this could damage the strike plate.

If you are not sure whether the latch plate is in the correct position, shut and open the door to see if it latches and closes properly. If it doesn't then you'll have to adjust the strike plate up or down, or forward or back until the door closes and latches correctly.

If the door is still jiggling or moving, it may be necessary to expand the latch hole in the strike plate. This is more frequent on older doors. It could be caused by wear and tear hinges that are too small, a incorrect size of the latch or damaged strike plate. If this is the case, follow the same procedure as adjusting the strike plate, using the use of a metal file instead a chisel and hammer.

Eliminating the Latch

The latch is the angled metal piece that moves through the hole on the inside edge of your door. When you turn the handle, it pushes this latch forward, allowing you to open the door. It also catches a hole on the door frame so that the door remains closed. If your door is wobbling when you close, replacing the latch could be all you need to correct the issue.

The screws that secure the door latch are hard to spot however, you can use a screwdriver to make a small hole in the trim plate and pry the latch off. After you've removed your trim plate, it'll be easy to remove the latch as well as the remaining bolts that hold the spindle and latch in place.

If the latch isn't easily removed, use a paperclip or tool to remove it from the handle mechanism. Insert the item into the slot for the latch that is recessed. gently move it around until you feel the handle and latch begin to separate. You may need to repeat this several times before the latch comes loose enough to allow it to be pulled out.

Once the old latch is removed it should be possible to move the new latch into the slot without problems. Make sure the latch is properly positioned in the slot and lined up with the screw chambers, and then use the new screws to fasten it to the strike plate and door frame.

Check the backset of the current handle (the distance between the centre of the large hole on the door's front and the edge) prior to installing the new handle. Check that the latch size of the new handle matches the measurement.

You'll need a new cylinder for your lock if replacing the handle and latch, or your old one is damaged. If you're not switching locks the new lock should fit inside your existing recess and also work with your existing keys. Select a latch with rectangular cover plates to match the handles you have.

Removing the Cover Plate

Door handles can begin to look worn over time, but if you replace them with a contemporary lever-on-rose designs, it's a simple and quick DIY and decorating project that will improve the overall look of your home. You can buy complete sets that include matching escutcheons as well as privacy adaptor kits.

To replace the door handle inside take off the cover plate (or rose) that protects the screws and the inner mechanism. Look for a release tab on the plate, and use a flathead screwdriver to lift it off the knob. It may have an opening along one side or be secured by a pin.

Remove the screw that is holding the handle in the interior and place it aside when the cover plate has been removed. Remove the screws that hold both the outer and inner plates. You can loosen them with a Philips Screwdriver. Remove the inner plates and latch from the door. Set them aside.

Most doors have gaps between the door jamb and the inner edge of the frame that allows for a handle, but not all have. If it doesn't have a handle, you'll need to drill a hole into the door to accommodate the new handle. This is the same process for opening a locked door however you'll have to be extra cautious not to scratch the frame or door.

After drilling the holes after which you'll have to put in new screws for the door knob. Make sure you purchase the same size as the old ones, so you won't have a handle that's too tight or loose. Installing a new latch and strike rod is also necessary. These aren't included in all door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a high-quality interior door handle replacement set. It's a factory fit and has received a plethora of five-star reviews from delighted customers. It's a great choice for replacing worn or damaged interior door handle hardware on your Chevy HHR.